Men's underwear comes in five main types: woven boxer shorts, knit boxers, boxer briefs, trunks and briefs. They differ in three measurements more than anything else: leg length, rise and how closely the leg fits. Everything else on the specification, from the fabric to the fly to the waistband, follows from which of the five the style is.
This guide covers how each type is cut and made, which fabrics suit it, how the waistband and size range are specified, and what the label and test reports need.
What are the types of boxers and men's underwear?
Five styles cover almost every men's underwear range, and "boxer" alone can mean three of them. A woven boxer is a loose short in shirting cloth. A knit boxer is the same loose shape in jersey. A boxer brief is a close-fitting knit with a leg, and a trunk is a boxer brief with a shorter leg and usually a lower rise. A brief has no leg at all.
| Type | Leg | Fit | Typical fabric | Fly |
|---|---|---|---|---|
| Woven boxer shorts | Loose, short leg | Relaxed, no hold | Cotton poplin, oxford, flannel | Button fly or open overlap |
| Knit boxers | Loose, short leg | Relaxed, soft | Cotton jersey | Open overlap or none |
| Boxer briefs | Close fit, commonly 10 to 15 cm inseam | Supportive, stays in place | Jersey or rib with elastane | Open fly, mock fly or none |
| Trunks | Close fit, commonly 5 to 8 cm inseam | Supportive, low profile | Jersey, modal or microfibre with elastane | Usually none |
| Briefs | No leg; leg opening at the thigh | Supportive, minimal coverage | Cotton jersey or rib | Y-front, horizontal fly or none |
Leg length is the inseam, from crotch point to leg hem; a long-leg boxer brief runs beyond 15 cm and is often sold for sport. Rise, from crotch to the top of the waistband, decides whether a style sits at the waist or on the hip. Trunks are usually low-rise, classic briefs and woven boxers mid to high.
How is men's underwear constructed?
Around a front pouch, a crotch or gusset seam, the leg finish and the fly. Two styles of the same type can feel completely different because of these details alone, so each one belongs on the tech pack.
| Construction point | Common options | What to specify |
|---|---|---|
| Front pouch | Flat front; contoured pouch in two or three seamed pieces | Pouch pattern, depth and seam positions |
| Gusset | Separate crotch panel, often double layer; or seam behind the pouch | Panel shape, layers and fabric |
| Fly | Y-front overlap; horizontal fly; button fly on wovens; mock fly; none | Fly type, overlap width and whether it is functional |
| Seams | Four-thread overlock; flatlock; coverstitch; bonded | Stitch type by seam, thread type |
| Leg finish | Coverstitched hem; elastic leg band; raw-cut or bonded edge | Finish and, for elastic, width and tension |
| Waistband join | Exposed elastic sewn on; covered elastic turned in self fabric | Method and stitch type |
Seams decide comfort. A four-thread overlock is fast and strong but leaves a ridge that presses into the inner leg. Flatlock lies flat and costs more in time and thread. Bonded and raw-cut edges remove the hem and suit microfibre trunks, provided the fabric does not curl or ladder when cut.
The pouch is where most fit complaints start. A flat front is simple but can feel restrictive; a contoured pouch of two or three pieces gives shape and support. Woven boxers are cut like a short, with a centre-back seam and often a one-piece leg with no side seam.
Which fabric is best for men's underwear?
Cotton single jersey with elastane for most everyday boxer briefs and trunks, cotton rib for classic briefs, modal for premium softness and microfibre for sport and seamless styles. Woven boxers use shirting cloth.
| Fabric | Typical composition | Typical GSM | Suits |
|---|---|---|---|
| Cotton single jersey | 95% cotton, 5% elastane | 160 to 200 | Everyday boxer briefs and trunks |
| Cotton jersey, no elastane | 100% cotton | 140 to 170 | Classic briefs, knit boxers |
| Cotton rib, 1x1 or 2x2 | Cotton, often with elastane | 180 to 230 | Briefs and vests; strong natural recovery |
| Modal jersey | Modal with 5 to 8% elastane | 170 to 210 | Premium trunks and boxer briefs |
| Microfibre | Polyamide or polyester with 10 to 20% elastane | 150 to 200 | Sport, seamless and quick-dry styles |
| Woven shirting | Cotton poplin, oxford or flannel | 100 to 140 | Woven boxer shorts |
These ranges are indicative and vary by mill and construction. Cotton is breathable, absorbent and easy to wash hot, but without elastane it relaxes in wear and the leg rides up. A small share of elastane, commonly around 4 to 8% in cotton or modal jersey, gives the garment recovery so it returns to shape through the day. Microfibre styles carry more elastane because they are designed to hold close to the body.
Modal is softer and more stable in the wash than standard viscose, and holds colour well through repeated laundering, which is why it dominates premium ranges. It pills more readily than cotton under friction at the inner thigh, so a pilling grade belongs on its specification.
How should the waistband be specified?
By type, width, composition and tension, approved on the sealed sample and tested for recovery. The waistband is the part that fails first in wear, and the part customers judge first in the hand.
| Waistband type | Description | Typical use |
|---|---|---|
| Exposed jacquard elastic | Knitted or woven elastic with a logo, sewn on visibly | Branded boxer briefs and trunks |
| Plush or brushed-back elastic | Elastic with a soft brushed inner face | Comfort-led ranges |
| Covered elastic | Elastic enclosed in a turned band of self fabric | Classic briefs, knit boxers, woven boxers |
| Fold-over elastic | Elastic folded over the raw edge | Low-profile and light styles |
| Bonded or raw-edge band | Elastic bonded inside the fabric, no stitching | Seamless and microfibre trunks |
Exposed waistbands commonly run about 25 to 45 mm wide, covered bands narrower. Elastic with an elastane core typically holds its recovery longer than a rubber core, which degrades with heat, chlorine and age. A heat-transfer label pressed over the band too hot can damage the elastic before the garment is worn.
Tension is specified as two measurements: the relaxed waist, measured flat with no stretch, and the extended waist, measured at full stretch. The pair defines how tight the garment feels and how far it will stretch to go on. Both appear on the measurement chart for every size, and recovery after repeated stretching and washing is tested on the elastic and on the finished garment. A tension and recovery method such as ISO 20932-1 or ASTM D4964 gives a figure both sides can agree on.
How are men's underwear sizes graded?
From a base size, usually medium, with the relaxed waist as the main grade point and the leg opening, rise and inseam grading in smaller steps. Alpha sizes are commonly keyed to a body waist band of about 5 cm, or 2 inches, per size.
The garment's relaxed waist is smaller than the body waist it fits, because the elastic stretches to go on. Keep that gap consistent across the range, or the small feels loose and the extra large tight. Inseam often grades little or not at all, since a trunk should look the same length on every size.
| Point of measure | How it is taken | Grading behaviour |
|---|---|---|
| Relaxed waist | Flat, unstretched, across the top of the band | Main grade point, commonly 4 to 5 cm per size in circumference |
| Extended waist | At full stretch | Grades with the relaxed waist |
| Front and back rise | Crotch seam to top of waistband | Small steps per size |
| Leg opening | Relaxed, across the leg hem | Small steps per size |
| Inseam | Crotch point to leg hem | Little or no grade |
Tolerances on underwear are tight, because a small error at the waist or leg opening is felt immediately; plus or minus 1 cm on the relaxed waist is a common starting point. Fit-test the range on more than one body, not only the base size; the size grading guide covers grade rules and fit sessions in detail.
What must the label say, and which tests should you ask for?
The fibre content, care instructions and country of origin, in the form the destination market prescribes, plus test reports for shrinkage, elastic recovery and colourfastness. The garment labelling guide covers several markets; the US rules below show how underwear-specific details are handled.
In the United States, the Federal Trade Commission requires fibres to be listed by generic name and percentage by weight, in order of predominance, with a 3% tolerance. A fibre under 5% is disclosed as "other fiber" unless it has a definite functional significance at that amount. "Spandex" is the US generic name and "elastane", the ISO name, may be used instead. Elastic that is part of the basic fabric is treated as trim if it does not exceed 20% of the surface area, and the content statement is then followed by "exclusive of elastic". Garments must carry care instructions on a permanent label. The US labelling guide covers the rest of the US requirements. [1]
Tagless printed labels are common in underwear because a sewn label at the back waist irritates. A printed label has to stay legible through the garment's life, so its wash durability is tested like the fabric's.
| Test | What it shows | Common methods |
|---|---|---|
| Dimensional stability | Shrinkage in length and width after washing | ISO 5077 with ISO 6330, or AATCC 135 |
| Spirality | Leg seams twisting after washing | Measured on the washed garment |
| Elastic recovery | Waistband and fabric return to size after stretching | ISO 20932-1, ASTM D4964 |
| Colourfastness to washing | Fading and staining onto other garments | ISO 105-C06 |
| Colourfastness to perspiration | Colour change from skin contact | ISO 105-E04 |
| Colourfastness to rubbing | Colour transfer under friction | ISO 105-X12 |
| Pilling | Surface pills from friction at the inner leg | ISO 12945 |
The mill test report guide explains how to read the grades. Where a programme calls for restricted-substance testing, it is run to the standard the programme names; the certifications in common use are listed on our sustainability page.
How should men's underwear be packed?
In multipacks, most often of three, five or seven, in a printed box, a polybag with a header card or a printed sleeve around folded garments. The pack is the product on the shelf, so its format, assortment and labelling are agreed alongside the garment.
An assorted multipack puts several shades side by side, so each colour needs its own approved standard and every lot is checked against it; a navy that drifts between lots is obvious once three sit together. Fold so the waistband branding shows, and keep the pouch shape in folding.
Labelling follows the pack in the United States. For packaged products such as T-shirts, the FTC says the required information must be on each item in the package and on the package, unless the package is transparent and the item labels can be read without opening it. [1]
Inner boxes, cartons and size ratios follow from the pack format. The carton and container calculator works through how many packs fit per carton and per container.
Short FAQ
What is the difference between boxer briefs and trunks?
Leg length and rise. Trunks have a shorter leg, commonly 5 to 8 cm of inseam, and usually sit lower on the hip; boxer briefs typically have 10 to 15 cm.
Do men's boxer briefs need elastane?
Yes, in most programmes. A share of around 4 to 8% elastane lets a close-fitting knit hold its shape through the day; without it the leg rides up.
Is modal better than cotton for underwear?
For softness and colour retention, yes. Cotton is more durable under hot washing and less prone to pilling, and a cotton-modal blend sits between the two.
Does elastane have to appear on the fibre label?
In the United States, a fibre under 5% may be named where it has a definite functional significance; otherwise it is disclosed as "other fiber". Elastane at 5% or more is listed by name and percentage.
Can different types share one waistband?
Yes. A range often uses one branded jacquard elastic across boxer briefs, trunks and briefs, with the relaxed and extended measurements set for each style.
Choose the type, then fix the three measurements
Pick the type from leg length, rise and fit, then fix those three on the measurement chart before anything else. The fabric and elastane share follow from the fit, the waistband is specified and tested as a component of its own, and the label and pack are agreed before bulk. A range built that way holds its shape through the tenth wash and looks the same in every size. Surajmal Shobhachand supplies innerwear, including briefs and boxers, in rib, jersey, modal and microfibre.
Ready to source with confidence?
Send a brief and we'll reply within 24 hours, with a first sample in 4 to 10 days.
Get in Touch→