For a garment sold to a consumer in Belgium, the fibre-content declaration starts at EU level: Regulation (EU) No 1007/2011 sets the generic fibre names, the composition percentages and the format every member state shares. We build the textile-composition declaration from the approved fibre specification and prepare regional-language artwork for the confirmed sales plan. What it adds is a general consumer-information rule, drawn from Books VI and IX of the Belgian Code of Economic Law, that mandatory product information must reach the consumer in a language understood where the product is sold. Belgium runs three of those languages inside one country, and which one (or ones) a label needs depends on where it ships, not on anything about the garment. For the shared groundwork, see our garment labelling guide. [1] [2]
What must appear on an apparel label sold in Belgium?
Regulation 1007/2011 requires the name and percentage by weight of all constituent fibres, in descending order, using only the fibre names set out in the Regulation's own annex. A fibre accounting for up to 5% of the total weight, or fibres collectively accounting for up to 15%, may instead be shown as “other fibres” with their combined percentage, but only where they cannot easily be stated at the time of manufacture. Terms such as "100%", "pure" or "all" may only be used where the product is made of a single fibre. Where non-textile parts of animal origin are present, the label must say so. [1]
| Label field | Belgian requirement | Production record to use |
|---|---|---|
| Fibre content | Generic names and percentages per Regulation (EU) 1007/2011 | Final fabric and component specification |
| Purity wording | "100%", "pure" or "all" only for a single-fibre product | Bill of materials |
| Animal-origin parts | "Contains non-textile parts of animal origin" where applicable | Component and trim specification |
| Tolerance | 2% extraneous fibres generally, 5% for carded products, 3% manufacturing tolerance under Article 20 | Lab test report against declared composition |
| Language | Dutch, French or German depending on the region of sale (see below) | Approved regional-language artwork |
| Consumer traceability | Manufacturer's name or trade mark with postal and electronic address; where the manufacturer is outside the EU, an EU-established responsible economic operator under Regulation (EU) 2023/988 Article 16, which may be the importer but need not be | Legal entity details confirmed at order |
A trim, a contrast panel of separately significant size, or a warmth filling changes which fields apply and how many compositions need declaring. Confirm construction before label copy is frozen.
Does a Belgium label need care instructions or an origin mark by law?
We prepare care instructions and country-of-origin marks when your programme calls for them, and omit either from artwork where it does not.
Regulation (EU) 1007/2011 is a fibre-composition rule. It does not impose care labelling and does not set conditions for a country-of-origin claim; it treats possible origin and harmonised care-labelling schemes as matters for review. We prepare care labels and country-of-origin marks to the programme brief. The Regulation sets no test for an origin claim; we check accuracy and supporting evidence against the misleading-actions rule in Directive 2005/29/EC before artwork approval. [1]
We prepare Belgium care-label artwork with ISO 3758:2023 symbols when your programme requires it, and without care content where it does not. A care claim, if one is printed, must still be accurate and not misleading under Belgian consumer law, and any wording needed for safety or correct use must be given in the language appropriate to the region of sale. [3]
How does the linguistic-region language rule work in practice?
Belgium's Code of Economic Law requires mandatory product information to be understandable to the consumer in the linguistic region where the product is sold. In practice that means Dutch in the Dutch-language region, French in the French-language region and German in the German-language region. Brussels-Capital and nationwide distribution are normally treated as needing multilingual treatment, since a single sale channel there reaches consumers from more than one language region. [2]
| Distribution pattern | Language treatment |
|---|---|
| Retail confined to Flanders | Dutch |
| Retail confined to Wallonia (excluding the German-speaking area) | French |
| Retail confined to the German-speaking Community | German |
| Brussels-Capital Region | Dutch and French, in practice |
| Nationwide or online sale across regions | Dutch, French and, where the German-speaking area is served, German |
For a Belgium-bound programme, the sales-region decision has its own artwork sign-off. We record the retailer's distribution footprint and prepare the matching language files; for online sales without a confirmed regional split, we can prepare all three language versions for approval before artwork is cut.
Does Belgium have its own rule on children's clothing cords?
Children's clothing cords and drawstrings sold in Belgium are assessed against NBN EN 14682:2015, the Belgian adoption of the European standard EN 14682:2014. It covers clothing for children up to age 14. This is a product-safety specification, not a textile-fibre labelling rule: following it supports the general safety assessment a garment needs to pass, and it sits alongside, not instead of, the fibre and language fields above. [4]
What does the Belgian fibre declaration look like in each language?
The wording changes with the region; the underlying composition figure does not.
| Fibre statement | Dutch-region wording | French-region wording | German-region wording |
|---|---|---|---|
| Single fibre, 100% | 100% Katoen | 100% Coton | 100% Baumwolle |
| Blend example | 65% Katoen, 35% Polyester | 65% Coton, 35% Polyester | 65% Baumwolle, 35% Polyester |
| Animal-origin note | Bevat niet-textiele delen van dierlijke oorsprong | Contient des parties non textiles d'origine animale | Enthält Teile tierischen Ursprungs, die nicht aus Textilien bestehen |
A garment shipped to a Belgian retailer without a confirmed regional distribution plan should carry whichever combination of these three the retailer intends to sell into, agreed before artwork is cut, not assumed from a previous order.
Where does an English-only EU label fall short in Belgium?
An apparel label built to satisfy Regulation (EU) 1007/2011 in English, and assumed to be portable across the EU, misses the one field Belgium checks hardest.
| English-only EU label | Why it falls short in Belgium | Belgium-specific action |
|---|---|---|
| Fibre content in English, correct composition | Composition is right; language is not understood in any Belgian region | Add Dutch, French or German (or a combination) matched to the sales region |
| No regional split | A single language rarely covers nationwide or Brussels distribution | Confirm the region or regions of sale before artwork is frozen |
| Correct tolerance figures | EU tolerances already apply and need no change | No action beyond the standard EU composition check |
| Origin statement, if used | Accurate and supportable; 1007/2011 sets no conditions for it, Directive 2005/29/EC does | Check the claim is accurate and supportable; 1007/2011 sets no test for it |
How should a Belgium label be released before bulk?
Release the Belgium-market label variant after the bill of materials and the regional-language artwork are both signed off, not from a first development sample. A late change to a trim or a fibre percentage changes the composition declaration; a late decision on which regions the order ships into changes which language files are needed at all.
| Approval stage | What to lock | Check on the physical garment |
|---|---|---|
| Composition review | Final fibre names and percentages | Label matches the approved bill of materials |
| Region and language review | Confirmed sales region(s) and matching Dutch, French or German artwork | Correct language variant present and legible |
| Childrenswear review, where applicable | NBN EN 14682:2015 cord and drawstring construction | Cords and drawstrings match the approved safety construction |
| Bulk inspection | Sealed artwork revision | Correct Belgium variant on the correct style, colourway and region |
Before issuing the label purchase order, send the printer-ready file, label dimensions, fold or placement instruction, and the style-to-region allocation in one approval pack. The buyer should nominate one owner to approve composition copy and another to confirm the retailer's distribution plan; both approvals belong to the same revision record. If a customer adds Brussels, a new online territory, or a German-speaking delivery area after labels are printed, hold the affected allocation before packing and request a revised language file. At final inspection, compare the carton or customer allocation with the sewn-in label variant, rather than checking only that a label is present.
The tech pack should name the Belgium label version and the region or regions it was built for, alongside the composition record it comes from.
Short FAQ
Is care labelling mandatory on a Belgian apparel label?
We prepare Belgium care-label artwork with ISO 3758:2023 symbols, other approved care content, or no care content, according to your programme brief.
Is a country-of-origin mark required on a Belgian garment label?
We prepare country-of-origin marks where your programme calls for them. Regulation (EU) 1007/2011 sets no rule for origin wording; the applicable test is the misleading-actions rule in Directive 2005/29/EC, so we check the claim is accurate and supportable before artwork approval. [1]
Does one language cover Brussels?
Not reliably. Brussels-Capital Region distribution is normally treated as reaching consumers from both the Dutch and French language regions, so a Brussels-bound label is usually built bilingual, not in a single language. [2]
Do cords and drawstrings need separate approval for a Belgian order?
Yes, for childrenswear up to age 14. NBN EN 14682:2015 gives the construction limits for cords and drawstrings and is a useful route to demonstrating conformity, covering children up to age fourteen. It is not an approval step: the general product-safety regime requires a safe product whether or not the standard is applied, and the presumption it confers extends only to the risks the standard addresses. [4]
What can FPS Economy do if a label is missing the required regional language?
FPS Economy can inspect labelling, require correction, stop supply and withdraw or recall product where labelling does not meet the required standard. SSL prepares the regional-language artwork, composition declaration and approval record so the buyer has a production file ready for inspection. [5]
Does a Belgian label need a full five-symbol care sequence to be safe to ship?
We can ship care-label artwork with a full five-symbol sequence, a shorter approved care instruction, or no care content, according to your programme. Where care wording is printed as a commercial choice, it must be accurate, since a misleading care claim is a separate consumer-protection issue from the fibre-labelling rule itself. [3]
The Belgium label judgement
We prepare a Belgium-bound label from the EU fibre declaration and the language artwork selected for its sales region. Confirm the fibre file first, then treat the regional-language decision as its own sign-off, since it is the field a Belgian check is most likely to catch.
Building the Belgium label into the production file
Send the tech pack, the Belgium-bound quantity by style and colour, and the intended sales region once it is decided, and the quote that comes back includes label preparation and approval in Dutch, French or German alongside production, not as a separate line item added once bulk is already booked. For the shared fibre-labelling baseline Belgium sits inside, see the European Union import guide. For a programme built to your own label from tech pack through to bulk, private label manufacturing covers labels, care labels and hang tags prepared to your artwork.
Ready to source with confidence?
Send a brief and we'll reply within 24 hours, with a first sample in 4 to 10 days.
Get in Touch→